Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - "Battery recycling and sustainability"

Nikolas Trifunovic and Claire Barlow.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 08 June 2018, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - "Development of a nano-Newton impulse balance

Nadeem Gabbani.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 18 May 2018, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - "Modelling and simulation of mechanochemistry in fluid flows."

Etienne Rognin.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 27 April 2018, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - "Better Understanding of a Carbon Nanotube Furnace Through Chemical Analysis"

James Ryley.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 08 December 2017, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - "Mechanochemistry of biological and synthetic polymers"

Susannah Evans & Niamh Willis-Fox.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 17 November 2017, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - "An introduction to the Oyen Lab and the challenges of gel metrology"

Dr Michelle Oyen.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 20 October 2017, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

"Laser surface processing of anodes for vacuum electronics".

Daniel Gortat.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 09 June 2017, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

A general introduction to ropes of engineering applications

Dr Pengzhu Wang and Bridon Bekaert.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 26 May 2017, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - Photonic sorting of aligned crystalline carbon nanotube textiles.

John Bulmer.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 05 May 2017, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - 'Advanced nanostructures for Li ion Batteries.

Please note change of date.

Chandramohan George.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 31 March 2017, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar

TBC.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 10 February 2017, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar

TBC.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 27 January 2017, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - "Jetting behaviours (or phenomena) found (or observed) in aqueous inkjet systems."

Dr Naoki Morita, FujiXerox, Japan (Introduced by Dr Steve Hoath).

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 16 September 2016, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - 'Manufacturing at twice the speed: limits to DoD inkjet printing'

Steve Hoath.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 10 June 2016, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Seminar - 'Control of Residual Stress and Failure Mechanisms for cold spray (CS) and laser assisted cold spray (LCS)''

Laurent Michaux.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 11 March 2016, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Seminar - 'Multiple beam powder bed fusion additive manufacture'

Andy Payne.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 19 February 2016, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Seminar - "Continuous manufacturing of pharmaceuticals and opportunities for inkjet printing"

Ronan Daly & Tomás Harrington.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 05 February 2016, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - "Carbon nanotube bundles as vertical and horizontal interconnections in microelectronics"

Nicolo Chiodarelli.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 11 December 2015, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - "Application of photonics in ultra precision manufacturing"

Bill O'Neill.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 20 November 2015, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - "10 years of inkjet"

Ian Hutchings.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 12 June 2015, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - "Carbon Footprint in the Cement Industry: Performance Variation and its Causes"

Daniel Summerbell.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 29 May 2015, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - "Femtosecond laser processing graphene"

Tianqi Dong.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 15 May 2015, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - "A Pathway from Research to Manufacturing"

Dr. Charles Featherston and Yoanna Shams.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 13 March 2015, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - "NanoManufacturing @ IfM"

Michael De-Volder.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 20 February 2015, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Process Group Seminar - "Design of a laser system for high power spatial phase modulation"

Jiho Han.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 16 January 2015, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar

Francisco Orozco.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 12 December 2014, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group - “Precision Glass Microstructure Fabrication Using Ultrafast Laser Induced Chemical Etching”

Wenhe Feng.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 13 December 2013, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group - "Evidence of print gap airflow affecting web printing quality"

Michael Hook, Xaar Ltd.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 22 November 2013, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group - "Trying to predict an instability: implementing filament breakup theory"

Caroline Earl.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 01 November 2013, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - "Advances in understanding inkjet fluids and jetting"

Dr Steve Hoath.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 31 May 2013, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - Will offshore wind become economic?

Jim Platts.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 26 April 2013, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Production Processes Group Seminar - Laser assisted plasma processing

Jon Parkins, Institute for Manufacturing.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 22 March 2013, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Ink drop coalescence and imbibition: dynamics and impacts on printing quality

Dr Kai Hsiao, Inkjet Research Centre, Institute for Manufacturing.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 13 May 2011, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Plastic packaging: a lifecycle view

Dr Claire Barlow, Institute for Manufacturng.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 18 March 2011, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Impact and coalescence of ink-jet drops

Elly S Betton, Inkjet Research Centre.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 25 February 2011, 11:30-12:30

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

"Can Ipods grow on trees?"

Chris Forman, Centre for Industiral Photonics.

Seminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

Friday 21 January 2011, 11:30-12:30